Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW MASTER SWITCH (for TMC, TMMR Made)

POWER WINDOW MASTER SWITCH (for TMC, TMMR Made) > INSTALLATION

for Preparation Click here



1. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY
  1. Install the multiplex network master switch assembly to the front upper armrest base panel with the 3 screws.



2. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL
  1. Connect each connector.



    B288554
  1. Engage the 4 guides, 2 clips and 5 claws, and install the multiplex network master switch assembly with front door armrest base panel.