Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW MASTER SWITCH (for TMMK Made)

POWER WINDOW MASTER SWITCH (for TMMK Made) > INSTALLATION

for Preparation Click here



1. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
  1. Engage the guide.

  1. Install the power window regulator master switch assembly to the front upper armrest base panel with the 3 screws.



2. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL
  1. Connect each connector.



    B380636
  1. Engage the 3 guides, 2 clips and 6 claws to install the power window regulator master switch assembly with front door armrest base panel.