Home › Vehicle Exterior › WINDOW / GLASS › FRONT PASSENGER SIDE POWER WINDOW SWITCH (for TMC, TMMR Made)

FRONT PASSENGER SIDE POWER WINDOW SWITCH (for TMC, TMMR Made) > REMOVAL

for Preparation Click here



1. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    B281683
  1. Using a moulding remover, disengage the 2 clips, 5 claws and 4 guides as shown in the illustration.

  1. Disconnect the connector and remove the power window regulator switch assembly with front door armrest base panel.



2. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY


    B279234
  1. Disengage the 2 claws and remove the power window regulator switch assembly from the front upper armrest base panel.