Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW MASTER SWITCH (for TMMK Made)

POWER WINDOW MASTER SWITCH (for TMMK Made) > REMOVAL

for Preparation Click here



1. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    B380635
  1. Using a moulding remover, disengage the 2 clips, 6 claws and 3 guides.

  1. Disconnect each connector to remove the power window regulator master switch assembly with front door armrest base panel.



2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY


    B372477
  1. Remove the 3 screws.

  1. Disengage the guide and remove the power window regulator master switch assembly from the front upper armrest base panel.