FRONT PASSENGER SIDE POWER WINDOW SWITCH (for TMMK Made) > REMOVAL |
| 1. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL |
![]() |
Using a moulding remover, disengage the 2 clips, 6 claws and 3 guides.
Disconnect each connector to remove the power window regulator switch assembly with front door armrest base panel.
| 2. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY |
![]() |
Disengage the 3 claws and 2 guides and remove the power window regulator switch assembly from the front upper armrest base panel.