COMPRESSOR (for 2AR-FE) > ON-VEHICLE INSPECTION |
| 1. INSPECT COMPRESSOR FOR METALLIC SOUND |
Check if there is abnormal metallic sound from the compressor when the A/C switch is on and the compressor operates.
If abnormal metallic sound is heard, replace the compressor assembly with pulley.
| 2. INSPECT REFRIGERANT PRESSURE |
| 3. INSPECT FOR LEAKAGE OF REFRIGERANT |
Using a gas leak detector, check for leakage of refrigerant.
If there is any leakage, replace the compressor assembly with pulley.
| 4. INSPECT COMPRESSOR ASSEMBLY WITH PULLEY |
Check operation of compressor assembly with pulley.
Start the engine.
Inspect the compressor pulley.

| *a | Compressor Assembly with Pulley | *b | Pulley |