Home › Drivetrain ยท U760E AUTOMATIC TRANSMISSION / TRANSAXLE › TRANSMISSION WIRE

TRANSMISSION WIRE > REMOVAL

for Preparation Click here



1. REMOVE TRANSMISSION VALVE BODY ASSEMBLY
(Click here)


2. REMOVE TRANSMISSION WIRE


    C224459
  1. Disconnect the connector of the transmission revolution sensor.

  1. Disconnect the 7 connectors of the shift solenoid valve.

  1. Disengage the clamp and disconnect the transmission wire.

  1. Remove the bolt and lock plate and disconnect the temperature sensor from the transmission valve body assembly.



    C201698
  1. Remove the bolt, lock plate and transmission wire from the transmission valve body assembly.