Home › Power Source / Network ยท NETWORKING › CAN COMMUNICATION SYSTEM

CAN COMMUNICATION SYSTEM > SYSTEM DIAGRAM

for Preparation Click here



OVERALL CAN BUS DIAGRAM (for LHD)


  1. The CAN communication system is composed of 3 buses.


    C370520E01


    Text in Illustration 
    1
    ECM
    (for V Bus)
    2
    Airbag Sensor Assembly
    (for V Bus)
    3
    Main Body ECU (Multiplex Network Body ECU)
    (for V Bus and Sub Bus 1)
    4
    Power Steering ECU with Motor Assembly
    (for V Bus)
    5
    Air Conditioning Amplifier Assembly
    (for V Bus)
    6
    1. Navigation receiver assembly
      (for Navigation Receiver Type)
    2. Radio and Display Receiver Assembly
      (for Radio and Display Type)
    (for V Bus)
    7
    Steering Sensor
    (for V Bus)
    8
    Smart Key ECU Assembly (Certification ECU)
    (w/ Smart Entry and Start System)
    (for V Bus)
    9
    Network Gateway ECU
    (w/ Network Gateway ECU)
    (for V Bus and Sub Bus 2)
    10
    Brake Actuator Assembly
    (for V Bus)
    11
    Clearance Warning ECU Assembly
    (w/ Toyota Parking Assist-sensor System)
    (for V Bus)
    12
    DLC3
    (for V Bus)
    13
    AFS ECU
    (w/ AFS)
    (for V Bus)
    14
    Inner Rear View Mirror Assembly
    (w/ Automatic High Beam System)
    (for V Bus)
    15
    Telematics Transceiver
    (w/ Telematics Transceiver)
    (for V Bus)
    16
    Combination Meter Assembly
    (for V Bus)
    17
    Multiplex Tilt and Telescopic ECU
    (w/ Power Tilt and Power Telescopic Steering Column System)
    (for Sub Bus 1)
    18
    Outer Mirror Control ECU Assembly (for Driver Side)
    (w/ Seat Position Memory System)
    (for Sub Bus 1)
    19
    Outer Mirror Control ECU Assembly (for Front Passenger Side)
    (w/ Seat Position Memory System)
    (for Sub Bus 1)
    20
    Position Control ECU and Switch Assembly (for Driver Side)
    (w/ Seat Position Memory System)
    (for Sub Bus 1)
    21
    CAN No. 5 Junction Connector
    (for Sub Bus 1)
    22
    Blind Spot Monitor Sensor RH
    (w/ Blind Spot Monitor System)
    (for Sub Bus 2)
    23
    Rear Television Camera Assembly
    (for Radio and Display Type (w/ Parking Assist Monitor System without Parallel Parking Assist Function))
    (for Sub Bus 2)
    24
    CAN No. 9 Junction Connector
    (for Sub Bus 2)

HINT:
  1. The main body ECU (multiplex network body ECU) functions as a gateway between the V bus and sub bus 1.
  2. The network gateway ECU functions as a gateway between the V bus and sub bus 2.
  3. Refer to the following bus wiring diagrams for details.


V BUS (for LHD)

C370521E01


C310576E02

HINT:
The CAN communication system connects to other networks via ECUs that function as a gateway (Click here).


SUB BUS 1 (for LHD)

C310946E01


SUB BUS 2 (for LHD)

C313123E01


OVERALL CAN BUS DIAGRAM (for RHD)


  1. The CAN communication system is composed of 1 bus.


    C370522E01


    Text in Illustration 
    1
    ECM
    (for V Bus)
    2
    Main Body ECU (Multiplex Network Body ECU)
    (for V Bus)
    3
    Airbag Sensor Assembly
    (for V Bus)
    4
    Power Steering ECU with Motor Assembly
    (for V Bus)
    5
    Air Conditioning Amplifier Assembly
    (for V Bus)
    6
    Radio and Display Receiver Assembly
    (for Radio and Display Type)
    (for V Bus)
    7
    Steering Sensor
    (for V Bus)
    8
    Smart Key ECU Assembly (Certification ECU)
    (for V Bus)
    9
    Brake Actuator Assembly
    (for V Bus)
    10
    Clearance Warning ECU Assembly
    (for V Bus)
    11
    DLC3
    (for V Bus)
    12
    Combination Meter Assembly
    (for V Bus)

    HINT:
    Refer to the following bus wiring diagrams for details.


V BUS (for RHD)

C241001E09


C269148E02

HINT:
The CAN communication system connects to other networks via ECUs that function as a gateway (Click here).