Home › General › SPECIFICATIONS › HEATING / AIR CONDITIONING

HEATING / AIR CONDITIONING > TORQUE SPECIFICATIONS



AIR CONDITIONING UNIT (for TMMK Made) 
Part Tightened
N*m
kgf*cm
ft.*lbf
Cooler expansion valve x No. 1 cooler evaporator sub-assembly
3.5
36
31 in.*lbf
Air conditioning unit assembly x Instrument panel reinforcement assembly
9.8
100
87 in.*lbf
Instrument panel reinforcement assembly x Body
20
204
15
Instrument panel reinforcement assembly x Brake pedal bracket
15
153
11
Instrument panel reinforcement assembly with air conditioning unit x Body (Nut)
9.8
100
87 in.*lbf
Instrument panel reinforcement assembly with air conditioning unit x Body (Bolt)
9.8
100
87 in.*lbf
Connector holder x Instrument panel reinforcement assembly
8.0
82
71 in.*lbf
Earth wire x Instrument panel reinforcement assembly
8.0
82
71 in.*lbf
No. 2 instrument panel brace sub-assembly x Instrument panel reinforcement assembly
20
204
15
No. 2 instrument panel brace sub-assembly x Body
20
204
15
Earth wire x No. 2 instrument panel brace sub-assembly
8.0
82
71 in.*lbf
Instrument panel to cowl brace sub-assembly x Instrument panel reinforcement assembly
20
204
15
Instrument panel to cowl brace sub-assembly x Body
20
204
15
Earth wire x Instrument panel to cowl brace sub-assembly
8.0
82
71 in.*lbf
Suction hose sub-assembly x Cooler expansion valve
9.8
100
87 in.*lbf

AIR CONDITIONING UNIT (for TMC, TMMR Made) 
Part Tightened
N*m
kgf*cm
ft.*lbf
Cooler expansion valve x No. 1 cooler evaporator sub-assembly
3.5
36
31 in.*lbf
Air conditioning unit assembly x Instrument panel reinforcement assembly
9.8
100
87 in.*lbf
Instrument panel reinforcement assembly x Body
20
204
15
Instrument panel reinforcement assembly x Brake pedal bracket
15
153
11
Instrument panel reinforcement assembly with air conditioning unit x Body (Nut)
9.8
100
87 in.*lbf
Instrument panel reinforcement assembly with air conditioning unit x Body (Bolt)
9.8
100
87 in.*lbf
Connector holder x Instrument panel reinforcement assembly
8.0
82
71 in.*lbf
Earth wire x Instrument panel reinforcement assembly
8.0
82
71 in.*lbf
Protector x Instrument panel reinforcement assembly (for Power Tilt and Power Telescopic Steering Column)
8.0
82
71 in.*lbf
Quick heater assembly x Body (w/ PTC Heater)
20
199
14
Shift lever support x Body (w/ PTC Heater)
12
122
9
Lower shift lever assembly x Shift lever support (w/ PTC Heater)
12
122
9
No. 2 instrument panel brace sub-assembly x Instrument panel reinforcement assembly
20
204
15
No. 2 instrument panel brace sub-assembly x Body
20
204
15
Earth wire x No. 2 instrument panel brace sub-assembly
8.0
82
71 in.*lbf
Instrument panel to cowl brace sub-assembly x Instrument panel reinforcement assembly
20
204
15
Instrument panel to cowl brace sub-assembly x Body
20
204
15
Earth wire x Instrument panel to cowl brace sub-assembly
8.0
82
71 in.*lbf
Suction pipe sub-assembly x Cooler expansion valve
9.8
100
87 in.*lbf

PTC HEATER ASSEMBLY 
Part Tightened
N*m
kgf*cm
ft.*lbf
Quick heater assembly x Body
20
199
14

COOLER EXPANSION VALVE (for TMMK Made) 
Part Tightened
N*m
kgf*cm
ft.*lbf
Cooler expansion valve x No. 1 cooler evaporator sub-assembly
3.5
36
31 in.*lbf

COOLER EXPANSION VALVE (for TMC, TMMR Made) 
Part Tightened
N*m
kgf*cm
ft.*lbf
Cooler expansion valve x No. 1 cooler evaporator sub-assembly
3.5
36
31 in.*lbf

COMPRESSOR (for 2AR-FE) 
Part Tightened
N*m
kgf*cm
ft.*lbf
Compressor assembly with pulley x Drain bolt
30
306
22
Stud bolt x Engine
10
102
7
Compressor assembly with pulley x Engine
25
250
18
No. 1 cooler refrigerant suction hose x Compressor assembly with pulley (for TMC, TMMR Made)
9.8
100
87 in.*lbf
Suction hose sub-assembly x Compressor assembly with pulley (for TMMK Made)
9.8
100
87 in.*lbf
No. 1 cooler refrigerant discharge hose x Compressor assembly with pulley
9.8
100
87 in.*lbf
Wire harness x Compressor assembly with pulley
8.0
82
71 in.*lbf

COMPRESSOR (for 2GR-FE) 
Part Tightened
N*m
kgf*cm
ft.*lbf
Magnet clutch hub x Compressor
18
183
13
Compressor and magnetic clutch x Drain bolt
30
306
22
Compressor and magnetic clutch x Engine
25
250
18
No. 1 cooler refrigerant suction hose x Compressor and magnetic clutch
9.8
100
87 in.*lbf
No. 1 cooler refrigerant discharge hose x Compressor and magnetic clutch
9.8
100
87 in.*lbf

COMPRESSOR (for 6AR-FSE) 
Part Tightened
N*m
kgf*cm
ft.*lbf
Compressor assembly with pulley x Drain bolt
30
306
22
Stud bolt x Engine
10
102
7
Compressor assembly with pulley x Engine
25
250
18
No. 1 cooler refrigerant suction hose x Compressor assembly with pulley
9.8
100
87 in.*lbf
No. 1 cooler refrigerant discharge hose x Compressor assembly with pulley
9.8
100
87 in.*lbf
Wire harness x Compressor assembly with pulley
8.0
82
71 in.*lbf

CONDENSER 
Part Tightened
N*m
kgf*cm
ft.*lbf
Cap x Cooler condenser assembly
2.9
30
26 in.*lbf
Cooler condenser assembly x Body
5.0
51
44 in.*lbf
Air conditioner tube and accessory assembly x Cooler condenser assembly
9.8
100
87 in.*lbf
No. 1 cooler refrigerant discharge hose x Cooler condenser assembly
9.8
100
87 in.*lbf

AIR CONDITIONING PRESSURE SENSOR 
Part Tightened
N*m
kgf*cm
ft.*lbf
Air conditioner pressure sensor x Air conditioner tube and accessory assembly
11
110
8