Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING PANEL (for TMC, TMMR Made)

AIR CONDITIONING PANEL (for TMC, TMMR Made) > REASSEMBLY

for Preparation Click here



1. INSTALL HEATER CONTROL SWITCH BOARD

NOTICE:
When reassembling the air conditioning control assembly, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.



    E301556
  1. Engage the claw to install the heater control switch board to the heater control housing sub-assembly.



    E301555
  1. Engage the 5 claws.

  1. Install the heater control retainer RH to the heater control housing sub-assembly with the 4 screws.