INTAKE AIR CONTROL VALVE ACTUATOR (for TCV) > INSTALLATION |
| 1. INSTALL INTAKE AIR CONTROL VALVE ACTUATOR (for TCV) |
![]() |
![]() |
![]() |
Check the tumble control valves.
| *a | Condition: Closed |
![]() |
Check that the gear of each tumble control valve is in the position shown in the illustration.
| *a | Condition: Closed |
Install a new gasket to the intake air control valve actuator.
Install the intake air control valve actuator to the intake manifold with the 2 bolts.
| 2. INSTALL INTAKE MANIFOLD |