Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW MASTER SWITCH (for TMC, TMMR Made)

POWER WINDOW MASTER SWITCH (for TMC, TMMR Made) > INSPECTION

for Preparation Click here



1. INSPECT MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY


    B234549E09
  1. Check that the LED illuminates.

    1. Apply battery voltage to the multiplex network master switch assembly and check that the LED illuminates.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → 18 (LED)
      Battery negative (-) → 12 (GND)
      LED illuminates

      Text in Illustration 
      *A
      for LHD
      *B
      for RHD
      *a
      Component without harness connected
      (Multiplex Network Master Switch Assembly)
      *b
      LED
      If the result is not as specified, replace the multiplex network master switch assembly.