Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM

DTC    U0100    Lost Communication with ECM / PCM "A"

DTC    U0101    Lost Communication with TCM

DTC    U0142    Lost Communication with Body Control Module "B"

DTC    U0155    Lost Communication with Instrument Panel Cluster Control Module (Combination Meter)

for Preparation Click here


DESCRIPTION

These DTCs are stored when the clearance warning ECU assembly cannot receive and recognize several signals via the CAN communication system.

DTC No.
DTC Detection Condition
Trouble Area
U0100
Lost Communication with ECM / PCM "A"
CAN communication system
U0101
Lost Communication with TCM
U0142
Lost Communication with Body Control Module "B"
U0155
Lost Communication with Instrument Panel Cluster Control Module (Combination Meter)

HINT:
When 2 or more DTCs starting with "U" are output simultaneously, inspect the connectors and wire harnesses of each ECU.


INSPECTION PROCEDURE

1.CHECK DTC OUTPUT
  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    Result:
    Result
    Proceed to
    DTCs (CAN communication system DTC) are output
    A
    No DTCs are output
    B



B
USE SIMULATION METHOD TO CHECK (Click here)
A

GO TO CAN COMMUNICATION SYSTEM (Click here)