Home › Vehicle Interior › HEATING / AIR CONDITIONING › PTC HEATER ASSEMBLY

PTC HEATER ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT QUICK HEATER ASSEMBLY


    E230975E14
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    I202-1 (B) - a1-1 (E)
    Always
    Below 1 Ω
    I202-2 (B) - a1-1 (E)
    Always
    Below 1 Ω

    Text in Illustration 
    *a
    Component without harness connected
    (Quick Heater Assembly)
    1. If the result is not as specified, replace the quick heater assembly.