Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY (for TMMK Made Fold Down Seat Type)

REAR SEAT ASSEMBLY (for TMMK Made Fold Down Seat Type) > DISASSEMBLY

for Preparation Click here



1. REMOVE REAR SEAT CUSHION FRAME SUB-ASSEMBLY


  1. Disengage the 13 hooks and remove the rear seat cushion frame sub-assembly.


    B279231



2. REMOVE BENCH TYPE REAR SEAT CUSHION COVER


  1. Remove the 12 hog rings and disengage the 4 fasteners, and remove the bench type rear seat cushion cover from the bench type rear seat cushion pad.


    B279232E02


    Text in Illustration 
    *a
    Fastener
    -
    -



3. REMOVE REAR SEAT SHOULDER BELT GUIDE LH


    B280243
  1. Remove the 2 screws.

  1. Disengage the guide and remove the rear seat shoulder belt guide LH.



4. REMOVE REAR SEAT AIRBAG ASSEMBLY LH


    B279772
  1. Disengage the 8 hooks.



    B279773
  1. Disengage the clamp and remove the 2 nuts.



    B279774E01
  1. Remove the rear side seatback frame sub-assembly and rear seat airbag assembly from the rear side seatback cover with pad.
    Text in Illustration 
    *1
    Rear Side Seatback Frame Sub-assembly
    *2
    Rear Seat Airbag Assembly
    *3
    Rear Side Seatback Cover with Pad

    CAUTION:
    1. The nuts must not be reused.
    2. Make sure that the rear side seatback frame sub-assembly is not deformed. If it is, replace it with a new one.



5. REMOVE REAR SIDE SEATBACK COVER SUB-ASSEMBLY LH


    B279219
  1. Remove the rear side seatback cover sub-assembly LH from the rear side seatback pad LH.



6. REMOVE REAR SEAT SHOULDER BELT GUIDE RH

HINT:
Use the same procedure as for the LH side.



7. REMOVE REAR SEAT AIRBAG ASSEMBLY RH

HINT:
Use the same procedure as for the LH side .



8. REMOVE REAR SIDE SEATBACK COVER SUB-ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.



9. REMOVE REAR SEAT CENTER SHOULDER BELT GUIDE


    B280249
  1. Remove the 2 screws.

  1. Disengage the guide and remove the rear seat center shoulder belt guide.



10. REMOVE REAR SEATBACK CARPET LH


    B279226E02
  1. Using a clip remover, remove the 3 clips.

  1. Disengage the 2 fasteners and remove the rear seatback carpet LH.
    Text in Illustration 
    *a
    Fastener



11. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY LH


    B279227
  1. Disengage the 20 claws and remove the rear seatback frame sub-assembly LH.



12. REMOVE SEPARATE TYPE REAR SEATBACK COVER LH


    B279228
  1. Remove the 8 hog rings and the separate type rear seatback cover LH from the separate type rear seatback pad LH.



13. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY


    B279221
  1. Remove the bolt and washer.

  1. Disengage the guide and remove the rear seat center armrest assembly.



14. REMOVE REAR SEATBACK CARPET RH


    B279222E02
  1. Using a clip remover, remove the 5 clips.

  1. Disengage the 3 fasteners and remove the rear seatback carpet RH.
    Text in Illustration 
    *a
    Fastener



15. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY RH


    B279223
  1. Disengage the 20 claws and remove the rear seatback frame sub-assembly RH.



16. REMOVE SEPARATE TYPE REAR SEATBACK COVER RH


    B279224
  1. Remove the 10 hog rings and separate type rear seatback cover RH from the separate type rear seatback pad RH.