REAR SEAT ASSEMBLY (for TMMK Made Fold Down Seat Type) > REASSEMBLY |
| 1. INSTALL SEPARATE TYPE REAR SEATBACK COVER LH |
![]() |
Using hog ring pliers, install the separate type rear seatback cover LH to the separate type rear seatback pad LH with 8 new hog rings.
| 2. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY LH |
![]() |
Engage the 20 claws to install the rear seatback frame sub-assembly LH to the separate type rear seatback cover with pad LH.
| 3. INSTALL REAR SEATBACK CARPET LH |
![]() |
Engage the 2 fasteners.
| *a | Fastener |
Install the rear seatback carpet LH with the 3 clips.
| 4. INSTALL REAR SEAT CENTER SHOULDER BELT GUIDE |
![]() |
Engage the guide.
Install the rear seat center shoulder belt guide with the 2 screws.
| 5. INSTALL SEPARATE TYPE REAR SEATBACK COVER RH |
![]() |
Using hog ring pliers, install the separate type rear seatback cover RH to the separate type rear seatback pad RH with 10 new hog rings.
| 6. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY RH |
![]() |
Engage the 20 claws to install the rear seatback frame sub-assembly RH to the separate type rear seatback cover with pad RH.
| 7. INSTALL REAR SEATBACK CARPET RH |
![]() |
Engage the 3 fasteners.
| *a | Fastener |
Install the rear seatback carpet RH with the 5 clips.
| 8. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY |
![]() |
Engage the guide.
Install the rear seat center armrest assembly with the bolt and washer.
| 9. INSTALL REAR SIDE SEATBACK COVER SUB-ASSEMBLY LH |
![]() |
Install the rear side seatback cover sub-assembly LH to the rear side seatback pad LH.
| 10. INSTALL REAR SEAT AIRBAG ASSEMBLY LH |
Install the rear seat airbag assembly to the rear side seatback frame sub-assembly with 2 new nuts.
Engage the clamp to connect the airbag wire harness.
Engage the 8 hooks to install the rear side seatback cover with pad.
| 11. INSTALL REAR SEAT SHOULDER BELT GUIDE LH |
![]() |
Engage the guide.
Install the rear seat shoulder belt guide LH with the 2 screws.
| 12. INSTALL REAR SIDE SEATBACK COVER SUB-ASSEMBLY RH |
| 13. INSTALL REAR SEAT AIRBAG ASSEMBLY RH |
| 14. INSTALL REAR SEAT SHOULDER BELT GUIDE RH |
| 15. INSTALL BENCH TYPE REAR SEAT CUSHION COVER |
Engage the 4 fasteners.
Using hog ring pliers, install the bench type rear seat cushion cover to the bench type rear seat cushion pad with 12 new hog rings.

| *a | Fastener | - | - |
| 16. INSTALL REAR SEAT CUSHION FRAME SUB-ASSEMBLY |
Engage the 13 hooks to install the rear seat cushion frame sub-assembly.
