BRAKE MASTER CYLINDER (for LHD) > REASSEMBLY |
| 1. INSTALL MASTER CYLINDER RESERVOIR GROMMET |
Apply a light layer of lithium soap base glycol grease to the entire circumference of 2 new master cylinder reservoir grommets.
Install the 2 brake master cylinder reservoir grommets to the brake master cylinder reservoir sub-assembly.
| 2. INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY |
Install the brake master cylinder reservoir sub-assembly to the brake master cylinder assembly.
| 3. INSTALL BRAKE MASTER CYLINDER STRAIGHT PIN |
Mount the brake master cylinder assembly in a vise.
![]() |
Using a pin punch and a hammer, tap in the brake master cylinder straight pin to secure the brake master cylinder reservoir sub-assembly.
| 4. INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER |
| 5. INSTALL BRAKE FLUID INFORMATION LABEL (for TMMK Made) |
| 6. INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY |