Home › Vehicle Exterior › LIGHTING (EXT) › SIDE TURN SIGNAL LIGHT ASSEMBLY (for TMC, TMMR Made)

SIDE TURN SIGNAL LIGHT ASSEMBLY (for TMC, TMMR Made) > INSPECTION

for Preparation Click here



1. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH


    E221729E01
  1. Connect a positive (+) lead from the battery to terminal 1 and a negative (-) lead to terminal 2.

  1. Check that the side turn signal light comes on.

    OK:
    The light comes on.

    Text in Illustration 
    *a
    Component without harness connected
    (Side Turn Signal Light Assembly LH)
    If the result is not as specified, replace the side turn signal light assembly LH.



2. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH


    E221729E01
  1. Connect a positive (+) lead from the battery to terminal 1 and a negative (-) lead to terminal 2.

  1. Check that the side turn signal light comes on.

    OK:
    The light comes on.

    Text in Illustration 
    *a
    Component without harness connected
    (Side Turn Signal Light Assembly RH)
    If the result is not as specified, replace the side turn signal light assembly RH.