Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER

CONDENSER > REASSEMBLY

for Preparation Click here



1. INSTALL COOLER DRYER


    E226859
  1. Using pliers, install a new cooler dryer to the modulator.



    E101932
  1. Sufficiently apply compressor oil to a new O-ring and the fitting surface of a new cap.

    Compressor Oil:
    ND-OIL 8 or equivalent



    E226858E03
  1. Using a 14 mm straight hexagon socket wrench, install the cap to the modulator.
    Text in Illustration 
    *a
    14 mm Straight Hexagon Socket Wrench

    Torque:
    2.9 N*m{ 30 kgf*cm , 26 in.*lbf }

    NOTICE:
    1. Keep the O-ring and O-ring fitting surface free from dirt or foreign matter.
    2. Do not use any compressor oil other than ND-OIL 8 or equivalent.