Home › Vehicle Interior › SEAT › FRONT SEATBACK HEATER (for TMMK Made)

FRONT SEATBACK HEATER (for TMMK Made) > REMOVAL

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:
  1. Use the same procedure for the RH side and LH side.
  2. The following procedure is for the LH side.



1. REMOVE FRONT SEAT ASSEMBLY
(Click here)


2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    B280155
  1. Disconnect the 2 rubber bands of the separate type front seatback cover.



3. DISCONNECT CONNECTORS


    B280156E01
  1. Disconnect the connector (A).

  1. Disengage the clamp (B).

  1. Disengage the claw (D) and 3 clamps (C) to separate the front seat airbag assembly wire harness.

  1. Disconnect the connector (E).

  1. Disengage the clamp (F).



4. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    B280157
  1. Disengage the hook.



    B280174
  1. Disengage the 2 fasteners.



    B280175
  1. Turn back the separate type front seatback cover.



    B396805
  1. Disengage the 2 hooks.



    B280129
  1. Disengage the 4 claws and remove the 2 front seat headrest supports.



    B280177
  1. Remove the separate type front seatback cover with pad.



5. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    B280131
  1. Remove the 2 hog rings.

  1. Disengage the 2 fasteners to remove the separate type front seatback cover from the separate type front seatback pad.



6. REMOVE FRONT SEATBACK HEATER ASSEMBLY


    B280178
  1. Remove the 8 tag pins and the front seatback heater assembly from the separate type front seatback cover.