Home › Vehicle Interior › SEAT › SEAT HEATER SWITCH (for TMC, TMMR Made Front Side)

SEAT HEATER SWITCH (for TMC, TMMR Made Front Side) > INSTALLATION

for Preparation Click here



1. INSTALL SEAT HEATER SWITCH
  1. Engage each claw to install the 2 seat heater switches to the front console upper panel garnish.



2. INSTALL FRONT CONSOLE UPPER PANEL GARNISH


  1. for Blank Type:



      B386779
    1. Engage the 2 claws to install the front console upper panel garnish as shown in the illustration.



  1. for 3 Switch Hole Type:

    1. Connect each connector.



    2. B386773
    3. Engage the 2 claws to install the front console upper panel garnish as shown in the illustration.



3. INSTALL FRONT PANEL GARNISH RH


    B386774
  1. Engage the 3 clips and 8 guides to install the front panel garnish RH.



4. INSTALL FRONT PANEL GARNISH LH


    B386775
  1. Engage the 3 clips and 8 guides to install the front panel garnish LH.