Home › Vehicle Interior › SEAT › SEAT HEATER SWITCH (for TMC, TMMR Made Front Side)

SEAT HEATER SWITCH (for TMC, TMMR Made Front Side) > REMOVAL

for Preparation Click here



1. REMOVE FRONT PANEL GARNISH LH


    B386768
  1. Disengage the 3 clips and 8 guides to remove the front panel garnish LH as shown in the illustration.



2. REMOVE FRONT PANEL GARNISH RH


    B386771
  1. Disengage the 3 clips and 8 guides to remove the front panel garnish RH.



3. REMOVE FRONT CONSOLE UPPER PANEL GARNISH


  1. for Blank Type:



      B386778
    1. Disengage the 2 claws and remove the front console upper panel garnish as shown in the illustration.



  1. for 3 Switch Hole Type:



      B386772
    1. Disengage the 2 claws as shown in the illustration.

    2. Disconnect each connector to remove the front console upper panel garnish.



4. REMOVE SEAT HEATER SWITCH


    B281487
  1. Disengage each claw to remove the 2 seat heater switches from the front console upper panel garnish.