Home › Engine / Hybrid System ยท 2GR-FE › ENGINE CONTROL › IGNITION COIL AND SPARK PLUG

IGNITION COIL AND SPARK PLUG > REMOVAL

for Preparation Click here



1. REMOVE INTAKE AIR SURGE TANK ASSEMBLY
(Click here).


2. REMOVE NO. 1 SURGE TANK STAY


    A206488
  1. Remove the bolt and No. 1 surge tank stay.



3. REMOVE IGNITION COIL ASSEMBLY


    A255007
  1. Remove the nut.

  1. Disconnect the 2 harness clamps.



    A192461
  1. Disconnect the 6 ignition coil connectors.



    A136825
  1. Remove the 6 bolts and 6 ignition coils.



4. REMOVE SPARK PLUG


    A192460
  1. Remove the 6 spark plugs.