FRONT SEAT ASSEMBLY (for TMC, TMMR Made Power Seat) > DISASSEMBLY |
| 1. REMOVE SEAT ADJUSTER COVER CAP |
![]() |
Remove the 2 seat adjuster cover caps.
| 2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB |
![]() |
Using a moulding remover, disengage the 4 claws to remove the slide and vertical power seat switch knob.
| 3. REMOVE RECLINING POWER SEAT SWITCH KNOB |
![]() |
Using a moulding remover, disengage the 4 claws to remove the reclining power seat switch knob.
| 4. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER |
![]() |
Disconnect the rubber band of the separate type front seatback cover.
| 5. REMOVE FRONT NO. 1 SEAT INNER CUSHION SHIELD |
![]() |
Remove the screw.
Disengage the 2 claws to remove the front No. 1 seat inner cushion shield from the clip as shown in the illustration.
![]() |
Disengage the 3 claws and 3 guides to remove the front No. 1 seat inner cushion shield as shown in the illustration.
![]() |
Using a clip remover, remove the clip.
| 6. REMOVE FRONT SEAT CUSHION SHIELD (for Driver Side) |
![]() |
Disengage the 4 claws, 7 guides and clip to remove the front seat cushion shield.
![]() |
Disengage the 2 claws and open the wire harness cover.
| *1 | Wire Harness Cover |
Remove the wire harness from the wire harness cover.
Disengage the 2 wire harness clamps.
Disconnect the front power seat switch connector.
![]() |
Disconnect the front lumbar power seat switch connector.
| 7. REMOVE FRONT SEAT CUSHION SHIELD (for Front Passenger Side) |
![]() |
Disengage the 4 claws, 8 guides and clip to remove the front seat cushion shield.
![]() |
Disengage the 3 claws and open the wire harness cover.
| *1 | Wire Harness Cover |
Remove the wire harness from the wire harness cover.
Disengage the 2 wire harness clamps.
Disconnect the front power seat switch connector.
| 8. REMOVE FRONT POWER SEAT SWITCH (w/o Seat Position Memory System) |
![]() |
Remove the 3 screws and front power seat switch from the front seat cushion shield.
| 9. REMOVE POSITION CONTROL ECU AND SWITCH ASSEMBLY (w/ Seat Position Memory System) |
![]() |
Remove the 3 screws and position control ECU and switch assembly from the front seat cushion shield LH.
| 10. REMOVE FRONT LUMBAR POWER SEAT SWITCH (for Driver Side) |
![]() |
Disengage the 4 claws to remove the front lumbar power seat switch from the front seat cushion shield.
| 11. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Driver Side) |
![]() |
Disengage the 5 claws and 6 guides to remove the front seat inner cushion shield.
| 12. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side) |
![]() |
Disengage the 5 claws and 7 guides to remove the front seat inner cushion shield.
| 13. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side) |
Disengage each clamp under the front seat assembly.
![]() |
Disengage the clamp.
Remove the nut and front seat inner belt assembly.
| 14. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side) |
![]() |
Remove the nut and front seat inner belt assembly.
| 15. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD |
![]() |
Disengage the fastener and separate the front seat airbag assembly wire harness.
![]() |
Disengage the claw and 3 clamps to separate the front seat airbag assembly wire harness.
w/ Seat Heater System:
![]() |
Disconnect the connector.
Disengage the clamp.
![]() |
Disconnect the connector.
Disengage the 2 clamps to separate the seat heater wire harness.
![]() |
Disengage the hook.
![]() |
Disengage each hook and remove the separate type front seat cushion cover with pad.
| 16. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER |
![]() |
Remove the 2 hog rings.
![]() |
Remove the 18 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.
| 17. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD |
![]() |
Remove the 5 hog rings.
![]() |
Remove the 3 hog rings.
![]() |
Remove the 2 hog rings.
Turn back the separate type front seatback cover.
![]() |
Remove the nut and the 2 brackets.
![]() |
Disengage the 4 claws and remove the 2 front seat headrest supports.
Remove the separate type front seatback cover with pad.
| 18. REMOVE FRONT SEAT AIRBAG ASSEMBLY |
![]() |
Disengage the 2 clamps.
Remove the 2 nuts and the front seat airbag assembly.
| 19. REMOVE SEPARATE TYPE FRONT SEATBACK COVER |
![]() |
Remove the 6 hog rings and separate type front seatback cover from the separate type front seatback pad.
| 20. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side) |
![]() |
Remove the screw.
Disengage the hook as shown in the illustration.
Disengage the clip and remove the front seat lower cushion shield LH.
| 21. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side) |
![]() |
Remove the screw.
Disengage the hook as shown in the illustration.
Disengage the clip and remove the front seat lower cushion shield RH.
| 22. REMOVE RECLINING ADJUSTER INSIDE COVER LH |
![]() |
Disengage the 2 guides to remove the reclining adjuster inside cover LH.
| 23. REMOVE RECLINING ADJUSTER INSIDE COVER RH |
![]() |
Disengage the 2 guides to remove the reclining adjuster inside cover RH.
| 24. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for Driver Side) |
![]() |
Remove the screw.
Disengage the 3 claws to remove the front seat cushion edge protector LH.
| 25. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for Driver Side) |
![]() |
Remove the screw.
Disengage the 3 claws to remove the front seat cushion edge protector RH.
| 26. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for Front Passenger Side) |
![]() |
Remove the screw.
Disengage the 3 claws to remove the front seat cushion edge protector LH.
| 27. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for Front Passenger Side) |
![]() |
Remove the screw.
Disengage the 3 claws to remove the front seat cushion edge protector RH.
| 28. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System) |
![]() |
Disconnect the connector.
Disengage the 2 clamps and remove the seat heater control sub-assembly.
| 29. REMOVE FRONT SEAT WIRE |
Disconnect the connectors and disengage the wire harness clamps to remove the front seat wire.
| 30. REMOVE FRONT NO. 2 SEAT WIRE |
Disconnect the connectors and disengage the wire harness clamps to remove the front No. 2 seat wire.
| 31. REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY |
![]() |
Remove the 4 bolts
Disengage the 4 guides to remove the separate type front seatback spring assembly.