FRONT SEAT ASSEMBLY (for TMMK Made Power Seat) > DISASSEMBLY |
| 1. REMOVE SEAT ADJUSTER COVER CAP |
![]() |
Remove the 2 seat adjuster cover caps.
| 2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB |
![]() |
Using a moulding remover, disengage the 4 claws to remove the slide and vertical power seat switch knob.
| 3. REMOVE RECLINING POWER SEAT SWITCH KNOB |
![]() |
Using a moulding remover, disengage the 4 claws to remove the reclining power seat switch knob.
| 4. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER |
![]() |
Disconnect the 2 rubber bands of the separate type front seatback cover.
| 5. REMOVE FRONT SEAT CUSHION SHIELD |
![]() |
Remove the screw.
Disengage the 2 claws to remove the front seat cushion shield.
![]() |
Disengage the wire harness clamp.
Disconnect the front power seat switch connector.
for Driver Side:
![]() |
Disengage 4 claws to remove the front lumbar power seat switch from the front seat cushion shield.
| 6. REMOVE FRONT POWER SEAT SWITCH |
![]() |
Remove the 3 screws and front power seat switch from the front seat cushion shield.
| 7. REMOVE FRONT LUMBAR POWER SEAT SWITCH (for Driver Side) |
![]() |
Disconnect the connector to remove the front lumbar power seat switch.
| 8. REMOVE FRONT SEAT INNER CUSHION SHIELD |
![]() |
Remove the 2 screws and front seat inner cushion shield.
| 9. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Seat) |
Disengage each clamp under the front seat assembly.
![]() |
Disengage the clamp.
Remove the nut and front seat inner belt assembly LH.
| 10. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Seat) |
![]() |
Disconnect the connector.
Disengage the clamp.
Remove the nut and front seat inner belt assembly RH.
| 11. REMOVE LOWER SEAT TRACK RAIL |
Remove the lower seat track rail.
| 12. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD |
![]() |
Disconnect the connector (A).
Disengage the clamp (B).
Disengage the claw (D) and 3 clamps (C) to separate the front seat airbag assembly wire harness.
w/ Seat Heater System:
Disconnect the connector (E).
Disengage the clamp (F).
for Driver Side:
![]() |
Separate the separate type front seat cushion cover.
for Front Passenger Side:
![]() |
Separate the separate type front seat cushion cover.
![]() |
Disengage the 4 hooks.
![]() |
Disengage each hook and remove the separate type front seat cushion cover with pad.
| 13. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER |
![]() |
Remove the 12 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.
| 14. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System) |
![]() |
Remove the 22 tag pins and the front seat cushion heater assembly from the separate type front seat cushion cover.
| 15. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD |
![]() |
Disengage the hook.
![]() |
Disengage the 2 fasteners.
![]() |
Turn back the separate type front seatback cover.
![]() |
Disengage the 2 hooks.
![]() |
Disengage the 4 claws and remove the 2 front seat headrest supports.
![]() |
Remove the separate type front seatback cover with pad.
| 16. REMOVE FRONT SEAT AIRBAG ASSEMBLY |
![]() |
Disengage the 2 clamps.
Remove the 2 nuts and the front seat airbag assembly.
| 17. REMOVE SEPARATE TYPE FRONT SEATBACK COVER |
![]() |
Remove the 2 hog rings.
Disengage the 2 fasteners to remove the separate type front seatback cover from the separate type front seatback pad.
| 18. REMOVE FRONT SEATBACK HEATER ASSEMBLY (w/ Seat Heater System) |
![]() |
Remove the 8 tag pins and the front seatback heater assembly from the separate type front seatback cover.
| 19. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side) |
![]() |
Remove the screw.
Disengage the hook as shown in the illustration.
Disengage the 2 claws to remove the front seat lower cushion shield LH.
| 20. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side) |
![]() |
Remove the screw.
Disengage the hook as shown in the illustration.
Disengage the 2 claws to remove the front seat lower cushion shield RH.
| 21. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Front Passenger Side) |
![]() |
Disengage the 2 claws to remove the front seat lower cushion shield LH.
| 22. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for Front Passenger Side) |
| 23. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System) |
![]() |
Disconnect the connector.
Disengage the clamp and remove the seat heater control sub-assembly.
| 24. REMOVE OCCUPANT DETECTION ECU (for Front Passenger Side) |
![]() |
Disconnect the 2 connectors.
Using a screwdriver with the tip wrapped with protective tape, disengage the claw and remove the occupant detection ECU.
| *1 | Protective Tape |
| 25. REMOVE FRONT SEAT WIRE |
Disconnect the connectors and disengage the wire harness clamps to remove the front seat wire.
| 26. REMOVE FRONT NO. 2 SEAT WIRE |
Disconnect the connectors and disengage the wire harness clamps to remove the front No. 2 seat wire.
| 27. REMOVE FRONT UPPER SEAT TRACK COVER LH |
![]() |
Disengage the 2 claws to remove the front upper seat track cover LH.
| 28. REMOVE FRONT UPPER SEAT TRACK COVER RH |
![]() |
Disengage the 2 claws to remove the front upper seat track cover RH.
| 29. REMOVE REAR UPPER SEAT TRACK COVER LH (for Front Passenger Side) |
![]() |
Disengage the 2 claws to remove the rear upper seat track cover LH.
| 30. REMOVE REAR UPPER SEAT TRACK COVER RH (for Front Passenger Side) |
![]() |
Disengage the 2 claws to remove the rear upper seat track cover RH.
| 31. REMOVE FRONT SEAT CUSHION PANEL SUB-ASSEMBLY (for Driver Side) |
![]() |
Remove the 4 bolts and front seat cushion panel sub-assembly.
| 32. REMOVE FRONT SEATBACK FRAME SUB-ASSEMBLY |
![]() |
Remove the 4 bolts and the front seatback frame sub-assembly.
| 33. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY (for Driver Side) |
![]() |
Disconnect the connector.
Disengage the 4 claws.
Disengage the 2 guides to remove the lumbar support adjuster assembly.
Remove the 2 front seatback hooks from the lumbar support adjuster assembly.
| 34. REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY (for Front Passenger Side) |
![]() |
Disengage the 4 claws.
Disengage the 2 guides to remove the separate type front seatback spring assembly.
Remove the 2 front seatback hooks from the separate type front seatback spring assembly.
| 35. REMOVE SEPARATE TYPE FRONT SEAT CUSHION SPRING ASSEMBLY |
![]() |
Remove the separate type front seat cushion spring assembly.