Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR

WASHER MOTOR > INSTALLATION

for Preparation Click here



1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    E301411
  1. Install the windshield washer motor and pump assembly.

  1. Connect the connector.



    E301410
  1. Connect the washer hose.



2. ADD WASHER FLUID
  1. Add washer fluid to the washer jar.



3. INSTALL FRONT FENDER LINER RH


  1. for TMC, TMMR Made:

    1. Install the front fender liner RH with the 4 clips and 5 screws.

    2. Install 2 new grommets.



    3. E226454E02
    4. Install the pin hold clip as shown in the illustration.
      Text in Illustration 
      *1
      Clip
      *2
      Pin Hold Clip
      *a
      Correct
      *b
      Incorrect

      NOTICE:
      Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is aligned vertically.

    5. Install the clip.



  1. for TMMK Made:

    1. Install the front fender liner RH with the 4 clips.

    2. Install 3 new grommets.

    3. Install the 5 screws and bolt.



    4. E300696E02
    5. Install the pin hold clip as shown in the illustration.
      Text in Illustration 
      *1
      Clip
      *2
      Pin Hold Clip
      *a
      Correct
      *b
      Incorrect

      NOTICE:
      Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is aligned vertically.

    6. Install the clip.



4. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH
  1. for TMC, TMMR Made:

    1. Install the front wheel opening extension pad RH with the 3 screws.

  1. for TMMK Made:

    1. Install the front wheel opening extension pad RH with the 3 screws.



5. INSTALL FRONT WHEEL RH

Torque:
103 N*m{ 1049 kgf*cm , 76 ft.*lbf }