Home › Vehicle Interior › SEAT › SEAT HEATER SWITCH (for Fold Down Seat Type)

SEAT HEATER SWITCH (for Fold Down Seat Type) > INSTALLATION

for Preparation Click here



1. INSTALL SEAT HEATER SWITCH
  1. Engage the 2 claws to install the seat heater switch to the rear upper door armrest base panel.



2. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL
  1. w/o Seat Heater System:

    1. Connect the connector.

  1. w/ Seat Heater System:

    1. Connect the 2 connectors.



    B280390
  1. Engage the 4 guides, 2 clips and 5 claws to install the rear power window regulator switch assembly with rear door armrest base panel.