Home › Vehicle Interior › SEAT › SEAT HEATER SWITCH (for Fold Down Seat Type)

SEAT HEATER SWITCH (for Fold Down Seat Type) > REMOVAL

for Preparation Click here



1. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL


    B280389
  1. Using a moulding remover, disengage the 2 clips, 5 claws and 4 guides as shown in the illustration.

  1. w/o Seat Heater System:

    1. Disconnect the connector and remove the rear power window regulator switch assembly with rear door armrest base panel.

  1. w/ Seat Heater System:

    1. Disconnect the 2 connectors and remove the rear power window regulator switch assembly with rear door armrest base panel.



2. REMOVE SEAT HEATER SWITCH


    B380775
  1. Disengage the 2 claws and remove the seat heater switch from the rear upper door armrest base panel.