Home › Vehicle Exterior › WINDOW / GLASS › REAR POWER WINDOW SWITCH (for TMC, TMMR Made)

REAR POWER WINDOW SWITCH (for TMC, TMMR Made) > REMOVAL

for Preparation Click here



1. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL


    B280389
  1. Using a moulding remover, disengage the 2 clips, 5 claws and 4 guides as shown in the illustration.

  1. w/o Seat Heater System:

    1. Disconnect the connector and remove the rear power window regulator switch assembly with rear door armrest base panel.

  1. w/ Seat Heater System:

    1. Disconnect the 2 connectors and remove the rear power window regulator switch assembly with rear door armrest base panel.



2. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY


    B279235
  1. Disengage the 2 claws and remove the rear power window regulator switch assembly from the rear upper door armrest base panel.