Home › Vehicle Exterior › WINDOW / GLASS › REAR POWER WINDOW SWITCH (for TMMK Made)

REAR POWER WINDOW SWITCH (for TMMK Made) > REMOVAL

for Preparation Click here



1. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL


    B380656
  1. Using a moulding remover, disengage the 2 clips, 5 claws and 3 guides.

  1. Disconnect the connector and remove the rear power window regulator switch assembly with rear door armrest base panel.



2. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY


    B372481
  1. Disengage the 3 claws and 2 guides and remove the rear power window regulator switch assembly from the rear upper door armrest base panel.