Home › Vehicle Interior › POWER OUTLETS (INT) › POWER OUTLET SOCKET (for TMMK Made)

POWER OUTLET SOCKET (for TMMK Made) > INSTALLATION

for Preparation Click here



1. INSTALL NO. 1 POWER OUTLET SOCKET COVER


    E300639
  1. Engage the 2 claws to install the No. 1 power outlet socket cover as shown in the illustration.



2. INSTALL NO. 1 POWER OUTLET SOCKET ASSEMBLY


    E292610
  1. Engage the claw to install the No. 1 power outlet socket assembly as shown in the illustration.



3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
  1. Connect each connector.



    B377623
  1. Engage the guide and 2 clips as shown in the illustration.

  1. Install the upper console panel sub-assembly with the 2 screws <C> or <D>.



4. INSTALL REAR CONSOLE UPPER PANEL SUB-ASSEMBLY
  1. Engage the 6 clips.

  1. Install the rear console upper panel sub-assembly with the 2 screws <C> or <D>.

  1. Connect the connector.

  1. Move the shift lever to P.



5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    B377617
  1. Turn the shift lever knob sub-assembly clockwise to install the shift lever knob sub-assembly.



    B373546
  1. Engage the 2 claws as shown in the illustration.



6. INSTALL UPPER CONSOLE BOX SUB-ASSEMBLY
  1. w/ Seat Heater System:

    1. Connect each connector.

  1. Engage the 4 clips to install the upper console box sub-assembly.