POWER OUTLET SOCKET (for TMMK Made) > REMOVAL |
| 1. REMOVE UPPER CONSOLE BOX SUB-ASSEMBLY |
![]() |
Disengage the 4 clips and remove the upper console box sub-assembly.
w/ Seat Heater System:
Disconnect each connector.
| 2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Disengage the 2 claws as shown in the illustration.
![]() |
Turn the shift lever knob sub-assembly counterclockwise and remove the shift lever knob sub-assembly.
| 3. REMOVE REAR CONSOLE UPPER PANEL SUB-ASSEMBLY |
Move the shift lever to N.
![]() |
Disconnect the connector.
Remove the 2 screws <C> or <D>.
![]() |
Disengage the 6 clips and remove the rear console upper panel sub-assembly.
| 4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Remove the 2 screws <C> or <D>.
![]() |
Disengage the 2 clips and guide as shown in the illustration.
Disconnect each connector to remove the upper console panel sub-assembly.
| 5. REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY |
![]() |
Using a screwdriver, disengage the claw and remove the No. 1 power outlet socket assembly as shown in the illustration.
| *a | Protective Tape |
| 6. REMOVE NO. 1 POWER OUTLET SOCKET COVER |
![]() |
Disengage the 2 claws and remove the No. 1 power outlet socket cover as shown in the illustration.