Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › NAME PLATE (for TMMK Made)

NAME PLATE (for TMMK Made) > INSTALLATION

for Preparation Click here


HINT:
When installing the name plates or emblem, heat the vehicle body and name plates or emblem using a heat light.

Heating Temperature 
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Name Plate or Emblem
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body, name plates or emblem excessively.



1. INSTALL LUGGAGE COMPARTMENT DOOR EMBLEM
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove any remaining double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Using a heat light, heat the vehicle body and a new luggage compartment door emblem.

  1. Remove the release paper from the luggage compartment door emblem.

    HINT:
    After removing the release paper, keep the exposed adhesive free from foreign matter.



    B281357
  1. Engage the 2 pins and install the luggage compartment door emblem as shown in the illustration.



2. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove any remaining double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Using a heat light, heat the vehicle body and a new No. 2 luggage compartment door name plate.

  1. Remove the release paper from the No. 2 luggage compartment door name plate.

    HINT:
    After removing the release paper, keep the exposed adhesive free from foreign matter.



  1. Install the No. 2 luggage compartment door name plate as shown in the illustration.


    B381216E02


    Text in Illustration 
    *a
    Release Paper
    -
    -

    Standard Measurement:

    Area
    Measurement
    Area
    Measurement
    A
    24.4 mm (0.961 in.)
    B
    25.0 mm (0.984 in.)
    C
    47.1 mm (1.85 in.)
    -
    -



3. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR NAME PLATE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove any remaining double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Using a heat light, heat the vehicle body and a new No. 3 luggage compartment door name plate.

  1. Remove the release paper from the No. 3 luggage compartment door name plate.

    HINT:
    After removing the release paper, keep the exposed adhesive free from foreign matter.



  1. Install the No. 3 luggage compartment door name plate as shown in the illustration.


    B401769E01


    Text in Illustration 
    *a
    Release Paper
    -
    -

    Standard Measurement:

    Area
    Measurement
    Area
    Measurement
    A
    49.1 mm (1.93 in.)
    B
    44.7 mm (1.76 in.)
    C
    73.4 mm (2.89 in.)
    -
    -