Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › NAME PLATE (for TMMK Made)

NAME PLATE (for TMMK Made) > REMOVAL

for Preparation Click here


HINT:
When removing the name plates or emblem, heat the vehicle body and name plates or emblem using a heat light.

Heating Temperature 
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Name Plate or Emblem
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body, name plates or emblem excessively.



1. REMOVE LUGGAGE COMPARTMENT DOOR EMBLEM


    B280032
  1. Apply protective tape around the luggage compartment door emblem as shown in the illustration.
    Text in Illustration 
    V100155
    Protective Tape

  1. Using a moulding remover, separate the double-sided tape and disengage the 2 pins and remove the luggage compartment door emblem.

    NOTICE:
    Be careful not to damage the vehicle body.



2. REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE


    B381214E01
  1. Apply protective tape around the No. 2 luggage compartment door name plate as shown in the illustration.
    Text in Illustration 
    *a
    Wooden Block
    *b
    Piano Wire
    V100155
    Protective Tape

  1. Insert a piano wire between the vehicle body and No. 2 luggage compartment door name plate.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire to separate the double-sided tape that holds the No. 2 luggage compartment door name plate to the vehicle body.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Remove the No. 2 luggage compartment door name plate.



3. REMOVE NO. 3 LUGGAGE COMPARTMENT DOOR NAME PLATE


    B381215E01
  1. Apply protective tape around the No. 3 luggage compartment door name plate as shown in the illustration.
    Text in Illustration 
    *a
    Wooden Block
    *b
    Piano Wire
    V100155
    Protective Tape

  1. Insert a piano wire between the vehicle body and No. 3 luggage compartment door name plate.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire to separate the double-sided tape that holds the No. 3 luggage compartment door name plate to the vehicle body.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Remove the No. 3 luggage compartment door name plate.