DTC B1610/13 Front Airbag Sensor RH Malfunction |
| DTC No. | DTC Detection Condition | Trouble Area |
| B1610/13 |
|
|
| 1.CHECK FRONT AIRBAG SENSOR RH |
![]() |
Turn the engine switch off.
Disconnect the cable from the negative (-) battery terminal.
Interchange the front airbag sensor RH with LH and connect the connectors.
Connect the cable to the negative (-) battery terminal.
Clear the DTCs stored in memory (Click here).
Turn the engine switch off.
Turn the engine switch on (IG), and wait for at least 60 seconds.
Check for DTCs (Click here).
| Result | Proceed to |
| DTCs B1610/13 and B1615/14 are not output. | A |
| DTC B1610/13 is output. | B |
| DTC B1615/14 is output. | C |
Turn the engine switch off.
Disconnect the cable from the negative (-) battery terminal.
Return the front airbag sensor RH and LH to their original positions and connect the connectors.
| *1 | Front Airbag Sensor LH |
| *2 | Airbag Sensor Assembly |
|
| ||||
|
| ||||
| A | ||
| ||