Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER (for TMMK Made)

REAR BUMPER (for TMMK Made) > DISASSEMBLY

for Preparation Click here



1. REMOVE REAR BUMPER LOWER COVER


    B400918
  1. Remove the 2 outside moulding retainers.

  1. Remove the 2 clips.



  1. Disengage the 10 claws and 2 guides, and remove the rear bumper lower cover.


    B400919



2. REMOVE REAR BUMPER SIDE RETAINER LH


    B401580
  1. Using a screwdriver, disengage the 3 clips as shown in the illustration.

  1. Disengage the 3 claws to remove the rear bumper side retainer LH.



3. REMOVE REAR BUMPER SIDE RETAINER RH

HINT:
Use the same procedure as for the LH side.



4. REMOVE REAR BUMPER SIDE SEAL LH


    B381252
  1. Remove the grommet.

  1. Remove the 2 screws.



    B381253
  1. Disengage the guide and claw to remove the rear bumper side seal LH.



5. REMOVE REAR BUMPER SIDE SEAL RH


    B381254
  1. Remove the grommet.

  1. Remove the 2 screws.



    B381255
  1. Disengage the guide and claw to remove the rear bumper side seal RH.



6. REMOVE REAR BUMPER ENERGY ABSORBER


    B381256
  1. Disengage the 2 guides to remove the rear bumper energy absorber.



7. REMOVE REAR BUMPER REINFORCEMENT SUB-ASSEMBLY


    B381257
  1. Remove the 6 nuts and rear bumper reinforcement sub-assembly.