OUTER MIRROR SWITCH > REMOVAL |
| 1. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for TMC, TMMR Made) |
![]() |
Using a moulding remover, disengage the 2 clips, 5 claws and 4 guides as shown in the illustration.
Disconnect each connector and remove the multiplex network master switch assembly with front door armrest base panel.
| 2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for TMMK Made) |
![]() |
Using a moulding remover, disengage the 2 clips, 6 claws and 3 guides.
Disconnect each connector to remove the power window regulator master switch assembly with front door armrest base panel.
| 3. REMOVE OUTER MIRROR SWITCH ASSEMBLY |
![]() |
Disengage the 4 claws and remove the outer mirror switch assembly.