Home › Vehicle Interior › LIGHTING (INT) › FOOTWELL LIGHT

FOOTWELL LIGHT > INSTALLATION

for Preparation Click here



1. INSTALL NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY (for Driver Side)
  1. for LHD:

    1. Engage the 2 claws to install the No. 1 interior illumination light assembly.

  1. for RHD

    1. Engage the 2 claws to install the No. 1 interior illumination light assembly.



2. INSTALL NO. 2 AIR DUCT SUB-ASSEMBLY (for Driver Side)
for LHD:

for RHD:



3. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for Driver Side)
(Click here)


4. INSTALL NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY (for Front Passenger Side)


    E300687
  1. Turn the No. 1interior illumination light assembly as shown in the illustration to install it.



5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for Front Passenger Side)
  1. Connect the connector.

  1. Engage the 2 guides and 4 claws to install the No. 2 instrument panel under cover sub-assembly.