Home › Vehicle Interior › LIGHTING (INT) › FOOTWELL LIGHT

FOOTWELL LIGHT > REMOVAL

for Preparation Click here



1. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for Driver Side)
(Click here)


2. REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY (for Driver Side)
for LHD:

for RHD:



3. REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY (for Driver Side)


  1. for LHD:



      E300667
    1. Disengage the 2 claws to remove the No. 1 interior illumination light assembly.



  1. for RHD:



      E300666
    1. Disengage the 2 claws to remove the No. 1 interior illumination light assembly.



4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for Front Passenger Side)


    B279888
  1. Disengage the 4 claws.

  1. Disengage the 2 guides.

  1. Disconnect the connector to remove the No. 2 instrument panel under cover sub-assembly.



5. REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY (for Front Passenger Side)


    E300686
  1. Turn the No. 1interior illumination light assembly as shown in the illustration to remove it.