FRONT BLOWER MOTOR > REMOVAL |
| 1. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for TMC, TMMR Made) |
![]() |
Disengage the 4 claws.
Disengage the 2 guides.
Disconnect the connector to remove the No. 2 instrument panel under cover sub-assembly.
| 2. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for TMMK Made) |
![]() |
Disengage the 4 claws.
Disengage the 2 guides.
Disconnect the connector to remove the No. 2 instrument panel under cover sub-assembly.
| 3. REMOVE BLOWER MOTOR WITH FAN SUB-ASSEMBLY |
Disconnect the connector.
![]() |
Remove the 3 screws and blower motor with fan sub-assembly.