Home › Vehicle Interior › HEATING / AIR CONDITIONING › FRONT BLOWER MOTOR

FRONT BLOWER MOTOR > REMOVAL

for Preparation Click here



1. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for TMC, TMMR Made)


    B279888
  1. Disengage the 4 claws.

  1. Disengage the 2 guides.

  1. Disconnect the connector to remove the No. 2 instrument panel under cover sub-assembly.



2. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for TMMK Made)


    B279888
  1. Disengage the 4 claws.

  1. Disengage the 2 guides.

  1. Disconnect the connector to remove the No. 2 instrument panel under cover sub-assembly.



3. REMOVE BLOWER MOTOR WITH FAN SUB-ASSEMBLY
  1. Disconnect the connector.



    E226850
  1. Remove the 3 screws and blower motor with fan sub-assembly.

    NOTICE:
    When removing the blower motor with fan sub-assembly, do not damaged or strike it.