Home › Vehicle Interior › LIGHTING (INT) › PERSONAL LIGHT (for TMC, TMMR Made)

PERSONAL LIGHT (for TMC, TMMR Made) > REMOVAL

for Preparation Click here



1. REMOVE ROOF CONSOLE BOX ASSEMBLY (w/o Sliding Roof)


    E227554
  1. Using a moulding remover, disengage the 4 clips.

  1. Disconnect the connector and remove the roof console box assembly.



2. REMOVE ROOF CONSOLE BOX ASSEMBLY (w/ Sliding Roof)


    E227556
  1. Using a moulding remover, disengage the 4 clips.

  1. Disconnect the connector and remove the roof console box assembly.



3. REMOVE MAP LIGHT BULB


    E227548
  1. Turn the 2 map light sockets with the 2 map light bulbs in the direction indicated by the arrows in the illustration and remove them as a unit.

  1. Remove the 2 map light bulbs from the 2 map light sockets.