FRONT DOOR COURTESY SWITCH (for TMC, TMMR Made) > REMOVAL |
| 1. REMOVE FRONT DOOR SCUFF PLATE |
![]() |
Disengage the 10 claws and remove the front door scuff plate LH.
| 2. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP |
Disconnect the front door opening trim weatherstrip.
| 3. REMOVE REAR DOOR SCUFF PLATE |
![]() |
Disengage the 6 claws and remove the rear door scuff plate LH.
| 4. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP |
Disconnect the rear door opening trim weatherstrip.
| 5. REMOVE CENTER PILLAR LOWER GARNISH |
![]() |
Disengage the 2 claws and 3 clips, and remove the center pillar lower garnish LH.
| 6. REMOVE FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY |
Disconnect the connector.
![]() |
Using a T30 "TORX" socket wrench, remove the screw and front door courtesy light switch assembly.