Home › Vehicle Exterior › LIGHTING (EXT) › REAR LIGHT ASSEMBLY (for TMC, TMMR Made)

REAR LIGHT ASSEMBLY (for TMC, TMMR Made) > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the RH side and LH side.
  2. The following procedure is for the LH side.



1. INSTALL REAR LIGHT ASSEMBLY


    E227533E04
  1. Install the rear light assembly with the 4 nuts.

    Torque:
    Nut (A):
    3.6 N*m{ 37 kgf*cm , 32 in.*lbf }
    Nut (B):
    4.1 N*m{ 42 kgf*cm , 36 in.*lbf }

  1. Engage the clamp.

  1. Connect the connector.



2. INSTALL LUGGAGE COMPARTMENT DOOR COVER


    B281699
  1. Install the luggage compartment door cover with the 13 clips.