Home › Vehicle Exterior › LIGHTING (EXT) › REAR LIGHT ASSEMBLY (for TMMK Made)

REAR LIGHT ASSEMBLY (for TMMK Made) > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the RH side and LH side.
  2. The following procedure is for the LH side.



1. INSTALL REAR LIGHT ASSEMBLY


    E300989E01
  1. Install the rear light assembly with the 4 nuts.

    Torque:
    Nut (A):
    4.1 N*m{ 42 kgf*cm , 36 in.*lbf }
    Nut (B):
    3.6 N*m{ 37 kgf*cm , 32 in.*lbf }

  1. Connect the connector.



2. INSTALL LUGGAGE COMPARTMENT DOOR COVER


    B380679
  1. Install the luggage compartment door cover with the 13 clips.