Home › Vehicle Exterior › LIGHTING (EXT) › LICENSE PLATE LIGHT ASSEMBLY (for TMC, TMMR Made)

LICENSE PLATE LIGHT ASSEMBLY (for TMC, TMMR Made) > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure described below is for the LH side.



1. INSTALL LICENSE PLATE LIGHT BULB
  1. Install the license plate light bulb.



    E255011
  1. Engage the 2 claws to install the license plate light lens.



2. INSTALL LICENSE PLATE LIGHT ASSEMBLY
  1. Engage the 2 claws to install the license plate light assembly.

  1. Connect the connector.



3. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY