Home › Vehicle Exterior › LIGHTING (EXT) › LICENSE PLATE LIGHT ASSEMBLY (for TMMK Made)

LICENSE PLATE LIGHT ASSEMBLY (for TMMK Made) > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the RH side and LH side.
  2. The following procedure is for the LH side.



1. INSTALL LICENSE PLATE LIGHT BULB
  1. Install the license plate light bulb.



    E255011
  1. Engage the 2 claws to install the license plate light lens.



2. INSTALL LICENSE PLATE LIGHT ASSEMBLY
  1. Engage the 2 claws to install the license plate light assembly.

  1. Connect the connector.



3. INSTALL UPPER BACK DOOR OUTSIDE GARNISH MOULDING


    E300987
  1. Engage the 3 claws to install the upper back door outside garnish moulding.



4. INSTALL LUGGAGE COMPARTMENT DOOR COVER


    B380679
  1. Install the luggage compartment door cover with the 13 clips.