Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC LIGHT CONTROL SENSOR (for TMMK Made)

AUTOMATIC LIGHT CONTROL SENSOR (for TMMK Made) > INSTALLATION

for Preparation Click here



1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR
  1. Engage the 2 claws to install the automatic light control sensor.



2. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY
  1. Connect the connector.

  1. Engage the clamp.



    B377625
  1. Engage the 11 clips to install the No. 1 speaker opening cover assembly as shown in the illustration.