WIPER ECU > INSTALLATION |
| 1. INSTALL WINDSHIELD WIPER RELAY ASSEMBLY |
Install the windshield wiper relay assembly with the nut.
Connect the connector.
| 2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY |
![]() |
Engage the 2 clips and 4 guides.
Install the 3 screws <D>.
Close the lower instrument panel door.
Install the lower instrument panel sub-assembly with the bolt <B> and screws <D>.
| 3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
Connect the connector.
Engage the 2 guides and 4 claws to install the No. 2 instrument panel under cover sub-assembly.
| 4. INSTALL INSTRUMENT SIDE PANEL |
![]() |
Engage the 3 guides as shown in the illustration.
![]() |
Engage the 4 claws to install the instrument side panel RH as shown in the illustration.
| 5. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP |
| 6. INSTALL COWL SIDE TRIM SUB-ASSEMBLY |
| 7. INSTALL FRONT DOOR SCUFF PLATE |
| 8. INSTALL FRONT PANEL GARNISH |
![]() |
Engage the 3 clips and 8 guides to install the front panel garnish RH.