Home › Vehicle Exterior › LIGHTING (EXT) › REAR LIGHT ASSEMBLY (for TMC, TMMR Made)

REAR LIGHT ASSEMBLY (for TMC, TMMR Made) > REASSEMBLY

for Preparation Click here


HINT:
  1. Use the same procedure for the RH side and LH side.
  2. The following procedure is for the LH side.



1. INSTALL REAR LIGHT GASKET


    E301903
  1. Install a new rear light gasket.



2. INSTALL REAR LIGHT SOCKET AND WIRE


    E301907
  1. Connect the connector to install the rear light socket and wire.



3. INSTALL NO. 1 REAR FOG LIGHT BULB (w/ Rear Fog Light)
  1. Install the No. 1 rear fog light bulb to the rear light socket and wire.



    E301905
  1. Turn the rear light socket and wire with the No. 1 rear fog light bulb as shown in the illustration to install them as a unit.



4. INSTALL BACK-UP LIGHT BULB
  1. Install the back-up light bulb to the rear light socket and wire.



    E301902
  1. Turn the rear light socket and wire with the back-up light bulb as shown in the illustration to connect them as a unit.